Acer X110 Series Скачать руководство пользователя страница 77

Страница: 77 / 107

X1161/X1261/X1161A/X1161N/X110/H5360

Confidential

6-1

Chapter 6

EDID Upgrade

6-1 EDID Introduction

Extended Display Identification Data is a VESA standard data format that contains basic

information about a display device and its capabilities, including vendor information,

maximum image size, color characteristics, factory pre-set timings, frequency range limits,

and character strings for the monitor name and serial number.
The information is stored in the display and is used to communicate with the system

through a Display Data Channel (DDC), which sites between the display device and the

PC graphics adapter. The system uses this information for configuration purposes, so the

monitor and system can work together.

Note: - The EDID Upgrade procedure for H5360/X1161/X1161A/X1161N/X110 is the same as

X1261, we take X1261 for example here.
- As for H5360, it needs to upgrade EDID for HDMI port.

Содержание X110 Series












































































































Результаты поиска

Содержание X110 Series

Отзывы:

Acer X110 Series, Руководство по обслуживанию, Страница: 77 / 107

Результаты поиска

Содержание X110 Series

Отзывы: