background image

vi

Service Guide Coverage

This Service Guide provides you with all technical information relating to the BASIC CONFIGURATION 
decided for Acer's "global" product offering. To better fit local market requirements and enhance product 
competitiveness, your regional office MAY have decided to extend the functionality of a machine (e.g. add-on 
card, modem, or extra memory capability). These LOCALIZED FEATURES will NOT be covered in this generic 
service guide. In such cases, please contact your regional offices or the responsible personnel/channel to 
provide you with further technical details.

FRU Information

Please note WHEN ORDERING FRU PARTS, that you should check the most up-to-date information available 
on your regional web or channel. If,  for whatever reason, a part number change is made, it will not be noted in 
the printed Service Guide.  For ACER-AUTHORIZED SERVICE PROVIDERS, your Acer office may have a 
DIFFERENT part number code to those given in the FRU list of this printed Service Guide. You MUST use the 
list provided by your regional Acer office to order FRU parts for repair and service of customer machines.

Содержание Veriton M275

























































































Отзывы: