Acer V173 Скачать руководство пользователя страница 4

Страница: 4 / 82

- 4 -

WARNING: (FOR FCC CERTIFIED MODELS)

NOTE:

this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and

used in accordance with the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception,

Which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

Warning

Use only shielded signal cables to connect I/O devices to this equipment. You are cautioned that changes or

modifications not expressly approved by the party responsible for compliance could void your authority to operate the

equipment.

As an ENERGY STAR

Partner our company has determined that this product meets the ENERGY STAR

guidelines for energy efficiency.

WARNING:

To prevent fire or chock hazard, do not expose the monitor to rain or moisture. Dangerously high voltages are

present inside the monitor. Do not open the cabinet. Refer servicing to qualified personnel only.

Содержание V173



















































































Результаты поиска

Содержание V173

Отзывы:

Похожие инструкции для V173

Бренды по названию

Популярные бренды

Acer V173, Руководство по обслуживанию

Результаты поиска

Содержание V173

Отзывы:

Похожие инструкции для V173

Бренды по названию

Популярные бренды