Acer UM.KX2EE.P01 Скачать руководство пользователя

Страница: 28 / 29

English

2. Toggle the joystick to the up or down to select System from the OSD.Then toggle to the

right to

navigate to the element you wish to adjust and press the joystick to enter it.

3. Toggle to the left or right to control functions.
4. Input: Select the source from HDMI1, HDMI2, DP.

Auto Source: The default is “On”, which can support auto search for signal source in

order.

-----------------------------------------------------------------------------------------------------------

Note:

Surround application must set Auto Source is “Off”.

6. DP Format: Default is DP1.2, can selection support DP1.1 or DP1.2 format.

Wide mode: You can select which screen aspect you are using. The options are Aspect

and Full.

Hot Key Assigment: Select the function of shortcut key 1(Modes, Brightness, Volume,

Gamma, Contrast, Blue Light, Over Drive

VRB) and shortcut keys 2 (Modes,

Brightness, Volume, Gamma, Contrast, Blue Light, Over Drive, VRB).

9. DDC/CI: Allows the monitor settings to be set through the software on the PC.

-----------------------------------------------------------------------------------------------------------

Note:

DDC/CI, short for Display Data Channel/Command Interface, which allows

monitor controls to be sent via software.

10. HDMI Black level: Select to set HDMI black level.
11. Quick start mode: Select Off or On. Turn on to speed up boot speed.

Save Setting to…(User mode only)

Game Mode Racing

Picture

Game Mode Action

Game Mode Sports

Mode - User

Enter

Move

Color

OSD

System

Save Settings to...

Audio

Gaming

Press the MENU key to open the OSD.

2. Toggle the joystick to the up or down to select "Save Setting to..." from the OSD.Then

toggle to the right to

navigate to the element you wish to adjust and press the joystick

to enter it.

Save Setting to some mode: There are three user-defined profiles available. When you

have decided what settings suit you, save them and system will be able to recall the

settings in the future when you turn on these mode.

Содержание UM.KX2EE.P01






























Результаты поиска

Содержание UM.KX2EE.P01

Отзывы:

Похожие инструкции для UM.KX2EE.P01

Бренды по названию

Популярные бренды

Acer UM.KX2EE.P01, Руководство пользователя

Результаты поиска

Содержание UM.KX2EE.P01

Отзывы:

Похожие инструкции для UM.KX2EE.P01

Бренды по названию

Популярные бренды