67
Eng
lis
h
a
If the user has set up a supervisor or user password, but "password on
boot" is disabled, s/he will not need to enter any password when
booting unless the HDD password has been set up.
b
If the user has set up a supervisor or user password, and "password on
boot" is enabled, s/he will need to enter the supervisor/user password
when booting. Moreover, the HDD password is needed if the user has
set up an HDD password under BIOS.
Fingerprint PBA enabled:
a
Fingerprint PBA is only functional when both the supervisor and user
passwords are enabled; however, users don't need to set up
"password on boot" under BIOS, so they can finish both supervisor
and user password setup by using Acer eSettings Management.
b
Once the user's fingerprint is matched, the system will boot the
operating system without requiring a password. If users want
advanced pre-boot security, HDD password and PlatinumPAS should
be enabled; then users will see sequential PlatinumPAS, fingerprint
PBA, and HDD password dialogs when the system boots up.
c
If the user's fingerprint does not match, the supervisor/user password
dialog box will appear, no matter whether or not "password on boot"
is enabled. Users can press ESC to activate the password dialog box
without fingerprint scanning.
Содержание TravelMate 6410 Series
Страница 1: ...TravelMate 6460 6410 Series User s Guide ...
Страница 27: ...9 Empowering Technology ...
