26
TravelMate 310 Service Guide
The following table describes the parameters in this screen. Settings in
boldface are the default and suggested parameter settings.
Note: To set the User Password or the Password on boot and Password
check during Resume parameters, you need to set the Supervisor
Password first.
Parameter
Description
Supervisor
Password is
When set, this password protects the computer and this Setup
Utility from unauthorized entry. It also protects certain
parameters in the Setup Utility.
When Password on boot and/or Password check during
Resume is enabled, you need to enter this password to continue
operation.
Options: Disabled or Enabled
User
Password is
When set, this password protects the computer and this Setup
Utility from unauthorized entry.
When Password on boot and/or Password check during
Resume is enabled, you need to enter this password to continue
operation.
Before setting the user password, you need to set the
Supervisor Password.
Options: Disabled or Enabled
Set
Supervisor
Password
Press Enter to set the supervisor password.
Set User
Password
Press Enter to set the user password.
Password on
boot
When enabled, the computer prompts you for a password when
the computer boots up.
Options: Enabled or Disabled
Password
check during
Resume
When enabled, the computer prompts you for a password when
the computer resumes from standby or hibernation mode.
Options: Disabled or Enabled
Содержание TravelMate 310
