Acer TravelMate 310, Руководство пользователя

Страница: 110 / 130

Setup Utility
90 User’s Guide
The password box appears:
2. Type a password. The password may consist of up to
seven characters (A-Z, a-z, 0-9).
3.
Press
Enter
. Retype the password to verify your first
entry and press Enter .
After setting the password, the computer automatically
sets the chosen password parameter to Enabled.
4. Press Esc to go to the Exit menu.
5. Press Save Change & Exit to save the password and
exit the Setup Utility.
To change a password, follow the same steps used to set a
password.
Removing a Password
Should you want to remove a password, do the following:
1. Use the
↑
and
↓
keys to highlight a Set Password
parameter (Supervisor or User) and press the Enter key.
The password box appears:
2. Enter your current password in the first parameter and
then press
Enter
.
3. Press Enter twice without entering anything in the next
two password box to remove the existing password.
4. Press Esc to go to the Exit menu.
Important: Be very careful when typing your
password because the characters do not appear on
the screen.
310-e.book Page 90 Tuesday, October 27, 1998 5:17 PM