TP Installation
1.
2.
Take out the touch screen, reverse placed on the workbench.
Tear protective film, and then in the figure 3 stickers position in turn tear apart
。
Note: check the location surface cleaning, and
static electricity protection tools and wear gloves
operation, check the material whether is
consistent, and keep the surface of the LCD
cleaning, avoid surface dust
TP
Tear TP
protective
film on the
back
Tear the
sticker
Figure 5-27. Installing the TP
3.
With touch screen :
Check the touch screen is put in place after assembly and cause of bad cockoblique direction took
tear touch screen not sticker on one side, and will touch screen FPC through hole on the cover area
to the left corner,Then has torn sticker on the left side of the touch screen on the corresponding
place on the cover, and then hold the touch screen on the right sie of the upper, tear On the right
side of the black single-sided adhesive stickers on the surface, and then touch screen all installed
to cover the surface..
Note: check the location surface cleaning, and
static electricity protection tools and wear
gloves operation, check the material whether is
consistent, and keep the surface of the LCD
cleaning, avoid surface dust
Cover components
(Install the LCD)
Check the touch screen is put in place after
assembly and cause of bad cock
Hold
TP
FPC
Through
Tear
the cover on
an empty hole
5-17
Service and Maintenance
Содержание TD070VA1
