Acer R5250-Q2000 - Altos - 2 GB RAM, Руководство по настройке

Страница: 90 / 138

Altos R5250 Installation Configuration Guide 74
9.
Please right-click on desktop and select Properties.
10.
Select Setting tab, Change the setting of Display to 1. Plug and Play
Monitor and ATI FireGL V5200 and click on Advanced.
11.
Select Troubleshoot tab, change the setting of the Hardware acceleration
to Full and apply the setting. You will not see the message again.
12.
Checking the Device Manager, you would see ATI FireGL V5200 and ATI
FireGL V5200 Secondary listed in Display adapters in Device Manager.
RAID Utility Installation
1.
For installing MegaRAID Storage Manager for SAS daughter board, please
insert the EasyBUILD 8.0 build 100 into the optical drive.
2.
Expand Utilities -> Altos R5250 -> SAS DAUGHTER BOARD, select
MegaRAID Storage Manager (Windows XP) and click on Setup.
3.
Follow the instruction, accept the license agreement and use the default
setting to the Setup Type.
4.
At Setup Type, please select StandAlone.
5.
Follow the instruction again to complete the installation.
Network Utility Installation
The ForceWare Network Access Manager is included in the chipset driver
package. The ForceWare Network Access Manager will be installed
automatically when you installing the chipset driver package.
Windows XP Professional Edition SP2 Installation (SAS RAID
daughter board with i-Button)
Below information describes how to manually install Windows XP Professional
Edition on Altos R5250 with SAS RAID daughter board installed.
Drivers Required
For Windows XP Installation, the following device drivers are required.
Device Version Directory on EasyBUILD
SAS RAID Daughter
Board 09.25.1029.20
07 \Disk\r5250\raid\sas1068\wsxp\
Onboard NVIDIA
NFP3600 Chipset Package 9.21 \Disk\R5250\onboard\Chipset\wsxp\