![background image](http://html.mh-extra.com/html/acer/predator-po3-640/predator-po3-640_user-manual_6242006.webp)
-
Upgrading your Computer
6
Pre-installation instructions
Always observe the following before you install any
component:
1.
Make sure that the ODD and card reader slot is empty.
2.
Turn off the power to the computer and all
peripherals.
3.
Unplug the power cord from the computer.
4.
Unplug the network cable and all connected peripheral
devices from the computer.
5.
Place the computer on a flat, steady surface.
6.
Open your computer according to the instructions on
removing the left side system cover on page 7.
7.
See the following sections for specific instructions on
the component you wish to install.
Post-installation instructions
Observe the following after installing a computer component:
1.
See to it that the components are installed according
to the step-by- step instructions in their respective
sections.
2.
Replace any expansion boards or peripherals that you
removed earlier.
3.
Replace the system covers. See Installing the left side
system cover on page 8.
4.
Connect the necessary cables.
5.
Turn on your computer.
Warning
Not turning off the computer properly before you start
installing the components may cause serious damage. Do not
attempt the procedures described in the following sections
unless you are a qualified service technician.
WARNING: Hot surface. Do not touch.
Содержание Predator PO3-640
Страница 1: ...Table of Contents 1 Predator PO3 640 User s Manual ...
Страница 9: ...Upgrading your Computer 9 System Layout CPU HDD1 HDD2 Wifi M2_1 PSU SSD M2_3 RAM VGA SSD M2_2 ...
Страница 19: ...Upgrading your Computer 19 6 Remove the screws that secure the Graphics board to the VGA Holder Bracket ...