Acer Predator PO3-600 E, Руководство пользователя

Страница: 65 / 100

67
Checkpoint Description
09 South Bridge initialization after microcode loading
0A
OEM initialization after microcode loading
0B
Cache initialization
0E Microcode not found
0F Microcode not loaded
10
PEI Core is started
11
Pre-memory CPU initialization is started
12 Pre-memory CPU initialization (CPU module specific)
13 Pre-memory CPU initialization (CPU module specific)
14
Pre-memory CPU initialization (CPU module specific)
15
Pre-memory North Bridge initialization is started
16 Pre-Memory North Bridge initialization (North Bridge module specific)
17 Pre-Memory North Bridge initialization (North Bridge module specific)
18
Pre-Memory North Bridge initialization (North Bridge module specific)
19
Pre-memory South Bridge initialization is started
1A Pre-memory South Bridge initialization (South Bridge module specific)
1B
Pre-memory South Bridge initialization (South Bridge module specific)
1C
Pre-memory South Bridge initialization (South Bridge module specific)
0x1D – 0x2A
OEM pre-memory initialization codes
2B Memory initialization. Serial Presence Detect (SPD) data reading
2C Memory initialization. Memory presence detection
2D
Memory initialization. Programming memory timing information
2E
Memory initialization. Configuring memory
2F Memory initialization (other).
30 Reserved for ASL (see ASL Status Codes section below)
31
Memory Installed
32
CPU post-memory initialization is started
33 CPU post-memory initialization. Cache initialization
34 CPU post-memory initialization. Application Processor(s) (AP) initialization
35
CPU post-memory initialization. Boot Strap Processor (BSP) selection
36
CPU post-memory initialization. System Management Mode (SMM) initialization.
37 Post-Memory North Bridge initialization is started