Acer PH530 series Скачать руководство пользователя

Страница: 39 / 41

... English

Appendices

Regulation & safety notices

This appendix lists the general notices of your Acer Projector.

FCC notice

This device has been tested and found to comply with the limits for a Class B

digital device pursuant to Part 15 of the FCC rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This device generates, uses, and can radiate radio frequency en-

ergy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular

installation. If this device does cause harmful interference to radio or televi-

sion reception, which can be determined by turning the device off and on, the

user is encouraged to try to correct the interference by one or more of the fol-

lowing measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the device and receiver.

• Connect the device into an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/television technician for

help.

Notice: Shielded cables

All connections to other computing devices must be made using shielded

cables to maintain compliance with FCC regulations.

Caution

Changes or modifications not expressly approved by the manufacturer could

void the user’s authority, which is granted by the Federal Communications

Commission, to operate this computer.

Содержание PH530 series










































Результаты поиска

Содержание PH530 series

Отзывы:

Похожие инструкции для PH530 series

Бренды по названию

Популярные бренды

Acer PH530 series, Руководство пользователя

Результаты поиска

Содержание PH530 series

Отзывы:

Похожие инструкции для PH530 series

Бренды по названию

Популярные бренды