E
nglish
Installation
Powering Off the Projector
1.
Press the Power/Standby button to turn off the projector lamp.
2.
After pressing the Power/Standby button, you will see a message
Power
off the lamp?
on the on-screen display. Press the Power/ Standby button
again to confirm. Otherwise the message will disappear after 5 seconds.
3.
Power/Standby LED indicator will light solid amber for about 30 seconds.
After the Power/Standby indicator starts flashing, you can turn off the
main power switch on the side of the projector.
If you want to turn on the projector again, you must press the Power/
Standby button within 90 seconds of the indicator flashing.
4.
Do not turn on the projector immediately following a power off procedure.
v
When the LAMP indicator flashs green for about 10 seconds, you will see
a message Fan Fail on the on-screen display. Please contact your local
dealer or our service center.
v
When the TEMP indicator lights solid orange, it indicates the projector has
been overheated. You will see a message Over Temperature on the on-
screen display. The projector will automatically shut itself down. Under
normal conditions, the projector can be switched on again for your
presentation. If the problem persists, you should contact your local dealer or
our service center.
