manualshive.com logo in svg

Acer Packard Bell EasyNote NX82 Series, Руководство по обслуживанию

Поделиться
Скачать
Acer Packard Bell EasyNote NX82 Series Скачать руководство пользователя страница 20

10

Chapter 1

TouchPad Basics

The following items show you how to use the TouchPad:

•

Move your finger across the TouchPad (1) to move the cursor.

•

Press the left (2) and right (3) buttons located beneath the TouchPad to perform selection and 
execution functions. These two buttons are similar to the left and right buttons on a mouse. 
Tapping on the TouchPad is the same as clicking the left button.

NOTE: 

When using the TouchPad, keep it - and your fingers - dry and clean. The TouchPad is sensitive to 

finger movement; hence, the lighter the touch, the better the response. Tapping too hard will not 
increase the TouchPad’s responsiveness.

Function

Left Button (2)

Right Button (3)

Main TouchPad (1)

Execute

Quickly click twice.

Tap twice (at the same speed 
as double-clicking a mouse 
button).

Select

Click once.

Tap once.

Drag

Click and hold, then use 
finger on the TouchPad to 
drag the cursor.

Tap twice (at the same speed 
as double-clicking a mouse 
button); rest your finger on 
the TouchPad on the second 
tap and drag the cursor.

Access 
context menu

Click once.

Содержание Packard Bell EasyNote NX82 Series

























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды