background image

TABLE OF CONTENTS

SPECIAL NOTES ON LCD MONITORS ..................................................... 1
INFORMATION FOR YOUR SAFETY AND COMFORT ............................ 2
UNPACKING............................................................................................ 5
ATTACHING / REMOVING THE BASE..................................................... 6
SCREEN POSITION ADJUSTMENT .......................................................... 6
CONNECTING THE POWER CORD.......................................................... 7
SAFETY PRECAUTION............................................................................. 7
CLEANING YOUR MONITOR .................................................................. 7
POWER SAVING...................................................................................... 8
DDC......................................................................................................... 8
CONNECTOR PIN ASSIGNMENT............................................................. 9
STANDARD TIMING TABLE .................................................................. 11
INSTALLATION...................................................................................... 12
USER CONTROLS .................................................................................. 13
TROUBLESHOOTING ............................................................................ 19

Содержание P246HL
























Отзывы: