Acer P203 Скачать руководство пользователя страница 2

Страница: 2 / 26

LC D Mo nito r Qu ick Setu p Gu id e

P203W

FCC notice

This device has been tested and found to comply with the limits for a Class B digital

device pursuant to Part 15 of the FCC rules. These limits are designed to provide reason-

able protection against harmful interference in a residential installation. This device

generates, uses, and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communica-

tions.

However, there is no guarantee that interference will not occur in a particular installa-

tion. If this device does cause harmful interference to radio or television reception, which

can be determined by turning the device off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the device and receiver.

•

Connect the device into an outlet on a circuit different from that to which the

receiver is connected.

•

Consult the dealer or an experienced radio/television technician for help.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to

maintain compliance with FCC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with

the Class B limits may be attached to this equipment. Operation with non-certified

peripherals is likely to result in interference to radio and TV reception.

Caution

Changes or modifications not expressly approved by the manufacturer could void the

user authority, which is granted by the Federal Communications Commission, to operate

this product.

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference,

and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Notice: Canadian users

This Class B digital apparatus complies with Canadian ICES-003.

Remarque à l’intention des utilisateurs canadiens

Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada.

Regulations and safety notices

Содержание P203



























Результаты поиска

Содержание P203

Отзывы:

Похожие инструкции для P203

Бренды по названию

Популярные бренды

Acer P203, Быстрая настройка

Результаты поиска

Содержание P203

Отзывы:

Похожие инструкции для P203

Бренды по названию

Популярные бренды