background image

English

LCD pixel statement

The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, 

some pixels may occasionally misfire or appear as black or red dots. This has no effect on 

the recorded image and does not constitute a malfunction.
This product has been shipped enabled for power management:

•  Activate display’s Sleep mode within 5 minutes of user inactivity.
• 

Wake the monitor when it is in Active Off mode,move the mouse or press any keyboard 

key.

Tips and information for comfortable use

Computer users may complain of eyestrain and headaches after prolonged use. Users are 

also at risk of physical injury after long hours of working in front of a computer. Long work 

periods, bad posture, poor work habits, stress, inadequate working conditions, personal 

health and other factors greatly increase the risk of physical injury.
Incorrect computer usage may lead to carpal tunnel syndrome, tendonitis, tenosynovitis or 

other musculoskeletal disorders. The following symptoms may appear in the hands, wrists, 

arms, shoulders, neck or back:

• 

numbness, or a burning or tingling sensation

• 

aching, soreness or tenderness

• 

pain, swelling or throbbing

• 

stiffness or tightness

• 

coldness or weakness

If you have these symptoms, or any other recurring or persistent discomfort and/or pain 

related to computer use, consult a physician immediately and inform your company’s health 

and safety department.
The following section provides tips for more comfortable computer use.

Finding your comfort zone

Find your comfort zone by adjusting the viewing angle of the monitor, using a footrest, or 

raising your sitting height to achieve maximum comfort. Observe the following tips:

•  refrain from staying too long in one fixed posture
• 

avoid slouching forward and/or leaning backward

• 

stand up and walk around regularly to remove the strain on your leg muscles

Содержание Nitro VG270Sbmiipx




























Отзывы: