Acer liquid M330, Руководство по обслуживанию

Страница: 81 / 126

76
2.1.2 Auto Run all phone
This test item use to whole phone after Assemble, the program will detect SD card and
SIM card after select this test item. The warning message will show as below figure if the device
not detected SD card and SIM card. It should be Power off the phone and confirm SD card and
SIM card.
2.1.3 Manual Run
This test item use to confirm single testing item is ok or not. First time power on the
device, this testing list is default the same as auto run all testing list.
a
、
when select “auto run all” , and finish the test, then select manual run, it will show all “auto run
all” test list.
b
、
when select “auto run all phone” , and finish the test, then select manual run, it will show all
“auto run all phone” test list.
c
、
if the test item is much that interface no space show, click the button to show
page down, click button to show page up
。