16
En
gl
ish
Display Mode and Battery Capacity
Note 1: The above table is based on battery mode (without
plugging power adapter).
Note 2: The above table is at maximum volume and USB WiFi is
active. Battery status is from full to end.
Note 3: The battery capacity will be decreased by longer time and
more recycling times. The above table is for reference only.
Note 4: Keep the power more than 30% always for better cell life.
Note 5: Full recharge the power bank at least every 3 months.
Note 6: For 1
ST
time usage, please plug in DC power to recharge
battery 8hrs.
DC 5V Out for Device Charge
1
In standby mode (after turning off projector), It will supply power DC 5V to
connected device while pressing Battery button. DC 5V will be turned off
automatically in 60 sec while device charging is full charge or disconnected.
2
In active mode (after turning on projector), MHL and DC 5V are
alternatively powered on, ex. DC 5V is off when MHL is on and DC 5V is on
when MHL is off.
3
In active mode, MHL will be top priority if both DC 5V and MHL port are
occupied.
Note: USB DC 5V out connector support 5V/1.0A power output for
power bank charging only when MHL source is not detected.
Referenced Operating
Scenarios
Movie Mode
(Display Hours)
Standard Mode
(Display Hours)
Display a movie by DVD
player via HDMI port
3.0hrs
1.5hrs
Local play USB flash thumb
content
2.5hrs
1.2hrs
Connect ChromeCast (display
videos via Youtube)
2.5hrs
1.2hrs
Source "LAN/WiFi" and do
wireless projection via mobile
2.5hrs
1.2hrs
