Acer ICONIA TAB A200, Руководство по обслуживанию

Страница: 43 / 145

Service and Maintenance 3-4
Getting Started
The flowchart ( Figure 3:1 , page 3-3 ) identifies sections illustrating the entire removal and
installation sequence. Observe the order of the sequence to avoid damage to any of the hardware
components.
Perform the following prior to performing any maintenance procedures:
1.
Place the system on a flat work surface.
2.
Disconnect the AC Adapter and remove all cables from the system and its peripherals.
3.
Make sure the system is completely powered down.
4.
To make sure the system is completely powered down, press and hold the Power button (A) for
4 seconds. (
Figure 3:2 )
a.
If the device is in powered down mode, allow the device to complete the boot process
(approximately 10 seconds). Then, power down normally.
b.
If the device is in sleep mode, wait for the Home Screen to clear. Then, power down
normally.
Figure 3:2. Device Overview with Power Button
5.
Press and hold the Power button for 4 seconds to show the Tablet Options dialog.
6.
Select Power Off to power down the device.
7.
From the Power Off dialog, select OK.
A