20
En
gl
ish
Onscreen Display (OSD) Menus
The projector has multilingual OSD that allow you to make image adjustments
and change a variety of settings.
Using the OSD menus
•
To open the OSD menu, press "MENU" on the remote control or control
panel.
•
When the OSD is displayed, use the
keys to select any item in the
main menu. After selecting the desired main menu item, press
to enter
submenu for feature setting.
•
Use the
keys to select the desired item and adjust the settings by
using the
keys.
•
Select the next item to be adjusted in the submenu and adjust as described
above.
•
Press "MENU" on the remote control or control panel, the screen will
return to the main menu.
•
To exit OSD, press "MENU" on the remote control or control panel. The
OSD menu will close and the projector will automatically save the new
settings.
Note:
Some of the following OSD settings may not be available. Please
refer to the actual OSD of your projector.
Note:
Functions vary depending on model definition.
Main menu
Sub menu
Setting
