EN-11
INSTALLATION
To install the monitor to your host system, please follow the steps as given
below:
Steps
1. 1-1 Connect Video Cable
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the VGA video cable to the computer.
1-2
Connect
HDMI Cable
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the HDMI cable to the computer.
2. Connect the Audio Cable (O
ptional
)
3. Connect power adaptor and power cord
Connect the power adaptor and power cord to the monitor, then to
a properly grounded AC outlet.
4. Power-ON Monitor and Computer
Power-ON the monitor first, then power-ON the computer.
This sequence is very important.
5. If the monitor still does not function properly, please refer to the
troubleshooting section to diagnose the problem.
2
HDMI
1-2
HDMI
1-1
VGA
VGA
AUDIO IN
DC IN
HDMI
VGA IN
3
HDMI
HDMI
1-2
HDMI
1-1
1-2
1-2
3 2
