25
Eng
lis
h
9
Image is too small
or too large
•
Adjust the zoom ring on the projector.
•
Move the projector closer to or further from the
screen.
•
Press "MENU" on the remote control. Go to "Image -
-> Aspect Ratio" and try different settings or press
"RATIO" on the remote control to adjust directly.
10
Image has slanted
sides
•
If possible, reposition the projector so that it is
centered on the screen.
•
Press the "Keystone / " button on the remote control
until the sides are vertical.
11
Image is reversed
•
Select "Image --> Projection" on the OSD and adjust
the projection direction.
12
Smart source
shows No signal
•
Power off projector and power on again.
13
Image hangs up
when displaying
video or photo in
Smart source
•
Power off projector and power on again.
