EN-38
TRANSFERRING FILES FROM YOUR
DIGITAL CAMERA TO COMPUTER
After using USB cable to establish a USB connection between the camera and your
computer, you can use your computer to share recorded images or video clips with
your family or friends via e-mail or post them on the Web. In order to do this, you
must install the USB driver onto your computer first. Note that before you begin to
install the software, you need to check your system according to the table as shown
below.
Step 1: Install the USB driver
Installation on Windows 98 & 98SE
The USB driver on the supplied CD-ROM is exclusively for Windows 98 and 98SE.
Windows 2000/ME/XP users need not install the USB driver.
1. Insert the enclosed CD-ROM into your CD-ROM drive.
2. When the welcome screen appears, click
“Install USB/PC-Cam driver”
. Follow
the on-screen instructions to complete the installation.
3. After the USB driver has been installed, restart your computer
Installation on MAC OS 9.0
For Mac OS 9.0 or higher, the computer will automatically recognize the digital
camera and load its own USB drivers.
System Requirements
(Windows)
System Requirements
(Macintosh)
CPU
Pentium III 600 MHz
processor or higher
PowerPC G3/G4
Operating System
Windows 98SE/Me/NT/2000/
XP
OS 9.0 or higher
RAM
32MB
(64MB RAM recommended)
32MB
(64MB RAM recommended)
Hard Disk Space
128MB hard disk space
128MB hard disk space
Required Devices
A CD-ROM drive
An available USB port
An available USB port
Display
Color Monitor (800x600,
24-bit or higher
recommended)
Color Monitor (800x600,
24-bit or higher
recommended)