English 53
USING THE PROJECTOR
Specification for “RS232 by TELNET”
:
1.
Telnet: TCP.
2.
Telnet port: 23 (for more detail, kindly please get contact with the service agent or team).
3.
Telnet utility: Windows “TELNET.exe” (console mode).
4.
Disconnection for RS232-by-Telnet control normally: Close
5.
Windows Telnet utility directly after TELNET connection ready.
±
Limitation 1 for Telnet-Control: there is less than 50 bytes for successive network payload for
Telnet-Control application.
±
Limitation 2 for Telnet-Control: there is less than 26 bytes for one complete RS232 command for
Telnet-Control.
±
Limitation 3 for Telnet-Control: Minimum delay for next RS232 command must be more than 200 (ms).
Info menu
otee:
Functions vary depending on model definition.
Info menu
View the projector information as listed below:
Serial Number
Source
Resolution
Refresh Rate
Display Mode
Power Mode (Standby)
Light Source Hours
Network Status
IP Address
Brightness Mode
FW Version
