ACER B277U
10
4.2 Assembly Procedures
Preparation before assemble:
1.Clean the room for work
2.Identify the area for material
3.Prepare the implement, equipment, materials as bellow
：
1) working table
2) Screw-driver
3) Knife
4) glove
5) cleaning cloth
6) ESD protection
After unplugging the power cord, the power board still have power energe. Please pay attention when
disassembling/assembling Power BD.
S1
Assemble the MAIN board,
power board and USB board.
Put the SHD on the worktable.
Insert USB-I/F BD wire to the IF/BD. Locate the P/BD into the SHD.
Insert FFC LVDS to the I/F BD.
Insert the wire on the P/BD to the I/F BD. Locate the I/F BD into the SHD. Locate the
USB BD into the SHD.
Lock 7 screws as the picture sequence.
S2
Assemble the MF and panel
Take the Panel on the sponge cushion.
Insert the little connector of the lamp wire to panel as the picture 1, thread the lamp
wire out of the hole of the MF. Assemble the MF onto the panel.
Lock 9 screws to the MF as the picture as the picture 2.
Insert the FFC wire to the Panel as the picture 3.
Assemble the SHD on the MF as the picture 4.
