Acer AT2230 Скачать руководство пользователя страница 40

Страница: 40 / 60

FRU (Field Replaceable Unit) List

This chapter gives you the FRU (Field Replaceable Unit) listing in global configurations of AT2230 & AT2231.Refer

to this chapter whenever ordering for parts to repair or for RMA (Return Merchandise Authorization).

NOTE:

Please note WHEN ORDERING FRU PARTS that you should check the most up-to-date information

available on your regional web or channel (http://aicsl.acer.com.tw/spl/). For whatever reasons a part number

change is made, it will not be noted in the printed Service Guide. For ACER AUTHORIZED SERVICE PROVIDERS,

your Acer office may have a different part number code from those given in the FRU list of this printed Service Guide.

You must use the local FRU list provided by your regional Acer office to order FRU parts for repair and service of

customer machines.

NOTE:

To scrap or to return the defective parts, you should follow the local government ordinance or regulations on

how to dispose it properly, or follow the rules set by your regional Acer office on how to return it.

Exploded Diagram (Model: AT2230 & AT2231)

Chapter 8

Содержание AT2230





























































Результаты поиска

Содержание AT2230

Отзывы:

Похожие инструкции для AT2230

Бренды по названию

Популярные бренды

Acer AT2230, Руководство по обслуживанию

Результаты поиска

Содержание AT2230

Отзывы:

Похожие инструкции для AT2230

Бренды по названию

Популярные бренды