Acer AT110 F2 Скачать руководство пользователя страница 34

Страница: 34 / 75

PCI Expansion Card Installation / Removal

Acer AT110 F2 has four bus slots with of three separate bus segments:

•

PCIE1 -- PCI Express x16 slots

•

PCIE2 -- PCI Express x8 slot

•

PCIE3 -- PCI Express x4 slot

•

PCIE4 -- PCI 32/33MHz slot

Install the expansion card

Press the release latch of the slot cover opposite the selected expansion slot.

Pull out the slot cover and store it for reassembly later.

NOTE:

Do not discard the slot cover. If the expansion card is removed in the future, the slot cover must be

reinstalled to maintain proper system cooling.

NOTE:

Remove the expansion card from its protective packaging, handling it by the edges.

Insert the card into the selected slot. Make sure that the card is properly seated.

Press the release latch to secure the card in place.

Connect the necessary cables to the expansion card as required.

Содержание AT110 F2












































































Результаты поиска

Содержание AT110 F2

Отзывы:

Бренды по названию

Популярные бренды

Acer AT110 F2, Руководство по обслуживанию

Результаты поиска

Содержание AT110 F2

Отзывы:

Бренды по названию

Популярные бренды