background image

40

The following table describes the parameters found in this menu.

Parameter

Description

Options

On Chip USB 

This field allows you to determine on 

chip USB type or disable on chip USB. 

[V1.1+V2.0], [V1.1] 

UDB Memory Type 

Use this item to change the type of 

USB memory to shadow or Base 

memory.

[Shadow], [Base 

Memory]

USB KB Legacy 

Support

This field enables or disables USB 

keyboard support function. 

[Enabled], [Disabled] 

USB Mouse 

Support  

This field enables or disables USB 

mouse support function. 

[Enabled], [Disabled] 

AC 97 Audio 

Change the on board Audio to auto or 

disabled

[Auto], [Disable] 

MAC LAN 

Enables or disables onboard LAN 

controller, If you wish to use the 

motherboard’s onboard LAN 

controller, you should certainly enable 

this BIOS feature.   

You can disable this feature if you do 

not want to use the motherboard’s 

onboard LAN controller. This may free 

up an IRQ for other devices to use. 

This is useful if your motherboard 

does not support APIC and have many 

devices that can not share IR Qs.   

[Enabled], [Disabled] 

MAC LAN Boot 

ROM

Enables or disables on board LAN 

boot ROM. 

[Enabled], [Disabled] 

 

Содержание Aspire L3600
























































































Отзывы: