Acer Aspire L300 Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 89

Acer Aspire L300 Скачать руководство пользователя страница 36

Chapter 2

29

Parameter

Description

Options

Onchip IDE Device

IDE DMA transfer access

This feature allows user to enable or disable the
IDE DMA transfer.

Enabled

Disabled

On-Chip Primary PCI IDE

This feature allows you to enable or disable the
on-chip IDE port. If a hard disk controller card is
used, set this item to Disabled.

Enabled

Disabled

IDE Primary Master/Slave PIO

This feature allows users to select the IDE PIO
mode.

Auto,

Mode 0,1,2,3,4

IDE Primary Master/Slave UDMA

This feature allows users to select the IDE
UDMA mode.

Auto,

33, 66, 100

On-Chip Serial ATA

This feature allows you to select the on-chip
SATA mode.
DIsabled: Disable the SATA controller
Auto: Auto arranged by BIOS
Combined: PATA and SATA are combined. Max
of 2 IDE drives in each channel.
Enhanced: Enable both SATA and PATA. Max of
6 IDE drives are supported.
Non-Combined: SATA is operating in legacy
mode.

Disabled
Auto
Combined
Enhanced
Non-Combined

Onboard Device

USB Controller

This item is used to enable or disable the on-chip
USB

Enabled

: Enable USB Controller

Disabled : Disable USB Controller

USB 2.0 Controller

Enable this item if the system supports USB 2.0

Enabled

: Enable USB 2.0

Controller
Disabled : Disable USB 2.0
Controller

USB Keyboard Support

This item lets you enable or disable the USB
keyboard driver within the onboard BIOS. The
keyboard driver is simulates legacy keyboard
command and lets you use a USB keyboard
during POST or after boot if you do not have a
USB driver in the operating system

Enabled : Enable USB Keyboard
Support

Disabled

: Disable USB Keyboard

Support

USB Mouse Support

This item lets you enable or disable the USB
mouse driver within the onboard BIOS. The
keyboard driver simulates legacy mouse
command and lets you use a USB mouse during
POST or after boot if you do not have a USB
driver in the operating system.

Enabled : Enable USB Mouse
Support

Disabled

: Disable USB Mouse

Support

Azalia Select

This feature allows you to enable or disable the
Azalia Audio.

Auto

DIsabled

Onboard 1394

This item allows user to enable or disabled the
1394 function.

Enabled

Disabled

Onboard LAN Function

This function is used to set whether the onboard
LAN card is enabled.

Enabled

Disabled

Onboard LAN Boot ROM

This function decide whether to invoke the boot
ROM of the onboard LAN chip

Enabled

Disabled

Super IO Device

POWER ON Function

This function allows user to select the power on
mode.

BUTTON ONLY
Any KEY

«
...
34
35
36
37
38
...
»

Содержание Aspire L300


























































































Отзывы:

Нет отзывов