![background image](http://html.mh-extra.com/html/acer/aspire-l100/aspire-l100_service-manual_5940037.webp)
Chapter 2
31
Power Management Setup
The Power Management menu lets you configure your system to most effectively save energy while operating
in a manner consistent with your own style of computer use.
Parameter
Description
Options
ACPI Function
This item allows you to enable or disable the ACPI
function
Enabled
Disabled
ACPI Suspend Type
This item specifies the power saving modes for ACPI
function. S1(POS): The S1 sleep mode is a low power
state. In this state, no system context (CPU or chipset)
is lost and hardware maintains all system context. S3
(STR): The S3 sleep mode is s power-down state in
which power is supplied only to essential components
such as main memory and wake-capable devices and
all system context is saved to main memory. The
information stored in memory will be used to restore
the PC to the previous state when an wake-up event
occurs.
S1 (POS)
: Set ACPI suspend
type to S1/POS(Power On
Suspend).
S3 (STR) : Set ACPI suspend
type to S3/STR
Video Off Method
Determines the manner in which the monitor is
blanked.
V/H SYNC+Blank: System turns off vertical and
horizontal synchronization ports and writes blanks to
the video buffer.
DPMS Support: Select this option if your monitor
supports the Display Power Management Signaling
(DPMS) standard of the Video Electronics Standards
Association (VESA). Use the software supplied for your
video subsystem to select video power management
values.
Blank Screen: System only writes blanks to the video
buffer.
V/H SYNC+Blank
DPMS Support
Blank Screen
ACPI Function
[Enabled]
ACPI Suspend Type
[S3(STR)]
Video Off Method
[V/H SYNC+Blank]
Hard Disk Power Down Mode
[Disabled]
Soft-Off by Power Button
[Delay 4 Sec]
PWRON After PWR-Fail
[Former-Sts]
USB KB Wake-Up From S3
[Enabled]
Wake-Up by LAN
[Enabled]
Resume by Alarm
[Disabled]
x Date(of Month) Alarm
0
x Time(hh:mm:ss) Alarm
00:00:00
Phoenix - Award BIOS CMOS Setup Utility
Power Management Setup
Item Help
Menu Level
X
F5:Previous Values F7:Default Settings
KLIJ
:Move Enter: Select +/-/PU/PD :Value F10:Save ESC:Exit F1:General Help