Acer Aspire 4743Z, Руководство по обслуживанию

Страница: 59 / 354

System Utilities
2-9
Setting a Password
0
Perform the following to set user or supervisor passwords:
1. Use the

and

keys to highlight the
Set Supervisor Password
parameter and press
Enter . The
Set Supervisor Password
dialog box appears.
Figure 2-4. Set Supervisor Password
2. Type a new password in the
Enter New Password
field. Passwords are not case
sensitive and the length must not exceed 8 alphanumeric characters (A-Z, a-z, 0-9, not
case sensitive). Retype the password in the
Confirm New Password
field.
IMPORTANT :
☞
Use care when typing a password. Characters do not appear on the screen.
3. Press Enter
.
After setting the password, the computer sets the
User Password
parameter to
Set
.
NOTE:
NOTE
:
Users can opt to enable the
Password on Boot
parameter.
4. Press F10 to save changes and exit BIOS Setup Utility .
Removing a Password
0
Perform the following:
1. Use the

and

keys to highlight
Set Supervisor Password
and press Enter . The
Set Supervisor Password
dialog box appears:
Figure 2-5. Set Supervisor Password
2. Type current password in
Enter Current Password
field and press Enter .
3. Press Enter twice
without
typing anything in
Enter New Password
and
Confirm New
Password
fields. Computer will set
Supervisor Password
parameter to
Clear
.
4. Press F10 to save changes and exit the BIOS Setup Utility .
Set Supervisor Password
Enter New Password [ ]
Confirm New Password [ ]
Set Supervisor Password
Enter Current Password [ ]
Enter New Password [ ]
Confirm New Password [ ]