Acer Aspire 4349, Руководство по обслуживанию

Страница: 115 / 223

Machine Maintenance Procedures 3-27
 Jet Motor 7762
The following thermal pads are approved for use:

Eapus XR-PE
1. Remove all traces of thermal grease from CPU using a lint-free cloth or cotton swab
and Isopropyl Alcohol, Acetone, or other approved cleaning agent.
2. Apply small amount of thermal grease to center of CPU.
NOTE: NOTE :
Force used during installation of thermal module is sufficient to spread grease
evenly over CPU top.
3. Place Thermal Module on Mainboard. Refer to Figure 3-23 .
4. Tighten three (3) captive screws (A) in numerical order from one (1) to three (3) to
mainboard (
Figure 3-23 ). Ensure the thermal module is properly aligned and seated.
5. Connect thermal module cable to mainboard connector (B) ( Figure 3-23 ).
6. Install Mainboard.