manualshive.com logo in svg

Acer Altos 900, Руководство пользователя, Страница: 127 / 188

Поделиться
Скачать
Acer Altos 900 Скачать руководство пользователя страница 127

Chapter 5 - EISA Configuration Utility 5-1

Chapter 5   EISA Configuration Utility

  5.1

EISA Configuration Utility

The EISA Configuration Utility (ECU) is a program that allows you to easily
configure your EISA computer.  Use this utility when you set up your EISA
computer for the first time or any time you change your configuration by adding
or removing an EISA or ISA board or memory.  The program stores the
configuration information in the computer’s nonvolatile memory where it is
available whenever you use your computer.

  5.1.1 Functions

The ECU does the following:

• 

Configures memory and main board options.

• 

Supports EISA and ISA boards, PCI devices, and plug-and-play ISA boards.

• 

Automatically detects EISA boards, PCI devices, and plug-and-play ISA
boards installed in the computer.

• 

Helps you configure ISA boards by providing the appropriate switch and
jumper settings, if the ISA board has a CFG file.

• 

Notifies you if a conflict occurs during configuration.

• 

Creates and maintains the System Configuration Information (SCI) file as a
backup for the computer’s nonvolatile memory.

• 

Supports configuration (CFG) file extensions.

Содержание Altos 900





























































































































































































Отзывы:

Нет отзывов