manualshive.com logo in svg

Acer Altos 11000 System, Руководство пользователя, Страница: 90 / 150

Поделиться
Скачать
Acer Altos 11000 System Скачать руководство пользователя страница 90

3-34

User’s Guide

PCI IRQ Sharing

PCI IRQ Sharing

Setting this parameter to 

Yes

 allows you to assign the same IRQ to

two different devices.  To disable the feature, select 

No

.

If there are no IRQs available to assign for
the remaining device function, we
recommend that you enable this parameter.

VGA Palette Snoop

This parameter permits you to use the palette snooping feature if you
installed more than one VGA card in the system.

The VGA palette snoop function allows the control palette register
(CPR) to manage and update the VGA RAM DAC (Digital Analog
Converter, a color data storage) of each VGA card installed in the
system.  The snooping process lets the CPR send a signal to all the
VGA cards so that they can update their individual RAM DACs.  The
signal goes through the cards continuously until all RAM DAC data
has been updated and allows the display of multiple images on the
screen.

Some VGA cards have required settings for this
feature.  Check your VGA card manual before
setting this parameter.

Plug and Play OS

When this parameter is set to 

Yes

, BIOS initializes only PnP boot

devices such as SCSI cards.  When set to 

No

, BIOS initializes all PnP

boot and non-boot devices such as sound cards.

Содержание Altos 11000 System























































































































































Отзывы:

Нет отзывов