There is one LED on the bracket to indicate the link status.
LED color :
Green
LED
“
ON
”
:
the 10Base-T link connection is successful.
LED
“
OFF
”
:
the 10Base-T link is NOT successful
Remote boot ROM socket:
their is a ROM socket on this adapter card
to
support remote boot ROM.
2. Quick Installing Guide
Follow these steps to install the card:
1. Power off PC & remove cover.
2. Plug in adapter card & connect cable to BNC or RJ-45.
3. Replace the cover & Power on PC
4. Check the system
’
s BIOS setup. Configure the
appropriate PCI setting.
5. Reset PC & configure your network system.
