Acer AL711 Скачать руководство пользователя страница 3

 

 

3

Important Safety Instructions 

Please read the followi ng instructions carefully. This manual should be retained for future use.   
1.  To clean LCD Monitor screen;   

-- Power off LCD Monitor and unplug the AC Cord.   

 

-- Spray a non-solvent cleaning solution onto a rag.   
-- Gently clean the screen with dampened rag.   

2.  Do not place the LCD Monitor near a window. Exposing the monitor to rain water, moisture or 

sunlight can severely damage it.   

3.  Do not apply pressure to the LCD screen. Excess pressure may cause permanent damage to the display.   
4.  Do not remove the cover or attempt to service this unit by yourself. Servicing of any nature should be 

performed by an authorized technician.   

5.  Store LCD Monitor in a room with a room temperature of -20° ~ 60°C (or -4° ~ 140°F). Storing the 

LCD Monitor outside this range could result in permanent damage.   

6.  If any of the following occurs, immediately unplug your monitor and call an authorized technician.   

*  Monitor to PC signal cable is frayed or damaged.   
*  Liquid spilled into LCD Monitor or the monitor has been exposed to rain.   
*  LCD Monitor or the case is damaged.   

7.  A certified line is required to connect this device to a power outlet. For a nominal current up to 6A and 

a device weight above 3 kg, a line not lighter than H05VV-F, 3G, 0.75 mm

2

 must be used. 

Chapter 1 Installation 

 

Unpacking   

Before unpacking the LCD Monitor, prepare a suitable workspace for your Monitor and computer. You 
need a stable and clean surface near a wall power outlet. Make sure that LCD Monitor has enough space 
around it for sufficient airflow. Though the LCD Monitor uses very little power, some ventilation is 
needed to ensure that the Monitor does not become too hot.   

 

AL711 

AL712 

AL713 

AL715 

AL716 

AL717 

DVI-D 

AUDIO  

After you unpack the LCD Monitor, make sure that the following items were included in the box:

   

*  LCD Monitor   

*  User's Manual   

 

*  Base 

*  1.8M Monitor-to-PC VGA Cable 

*  1.5M Stereo Jack Audio Cable 

*  1.8M Monitor-to-PC DVI-D Cable 

*  1.8M Power Cord 

If you find that any of these items is missing or appears damaged,  contact your dealer immediately. 

Содержание AL711














Отзывы: