Trouble Sh ooting
Page 3
A L502
Continue
Check if the voltage on I308 pin3 that
is high level DC at 5V.
Check the 3.3 V power are supplied on I308 pin 2.
OK
NG
OK
NG
Failure point
I308 Failure
Is a dot clock being outputted under the
condition that a LCD module is connected to
P303 pin 44?
OK
NG
Failure point
1) I300 failure
2) Printed wire broke between I302 and P303 pin 44.
Check the H-sync pulse of negative polarity is
output on P303 pin 38 at TTL level.
OK
NG
Failure point
1) I300 failure
2) Printed wire broke between I300 and P303 pin 38.
Check the V-sync of negative polarity are
output on P303 pin 40.
OK
NG
Next Page
Failure point
1) I300 failure
2) Printed wire broke between I300 and P303 pin 40.
Failure point
1) Printed wire broke between P301 and I308
