Acer AL2223W h Скачать руководство пользователя

Страница: 2 / 60

- 2 -

Copyright

transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in

any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the

prior written permission of Acer Incorporated.

Disclaimer

The information in this guide is subject to change without notice. Acer Incorporated makes no representations or

warranties, either expresses or implied, with respect to the contents hereof and specifically disclaims any

warranties of merchantability or fitness for any particular purpose, Any Acer Incorporated software described in

this manual is sold or licensed “as is ”. Should the programs prove defective following their purchase, the buyer

(and not Acer Incorporated, its distributor, of its dealer) assumes the entire cost of all necessary servicing, repair,

and any incidental or consequential damages resulting from any defect in the software.

Acer is a registered trademark of Acer Corporation.

Intel is a registered trademark of Intel Corporation.

Pentium and Pentium II/III are trademarks of Intel Corporation.

Other brand and product names are trademarks and/or registered trademarks of their respective holders.

Содержание AL2223W h





























































Результаты поиска

Содержание AL2223W h

Отзывы:

Похожие инструкции для AL2223W h

Бренды по названию

Популярные бренды

Acer AL2223W h, Руководство по обслуживанию

Результаты поиска

Содержание AL2223W h

Отзывы:

Похожие инструкции для AL2223W h

Бренды по названию

Популярные бренды