background image

3

 

SPECIAL NOTES ON LCD MONITORS

 

 

 
The following symptoms are normal with LCD monitor and do not indicate a 
problem. 
 
 

NOTES 

 
 

  Due to the nature of the fluorescent light, the screen may flicker during 

initial use. Turn off the Power Switch and then turn it on again to make 
sure the flicker disappears. 

  You may find slightly uneven brightness on the screen depending on the 

desktop pattern you use. 

  The LCD screen has effective pixels of 99.99% or more. It may include 

blemishes of 0.01% or less such as a missing pixel or a pixel lit all of the 
time. 

  Due to the nature of the LCD screen, an afterimage of the previous screen 

may remain after switching the image, when the same image is displayed 
for hours. In this case, the screen is recovered slowly by changing the 
image or turning off the Power Switch for hours. 

 
BEFORE YOU OPERATE THE MONITOR 
 
FEATURES 

 

 43.2cm(17”) TFT Color LCD Monitor 

  Crisp, Clear Display for Windows 

 

Recommened Resolutions: 1280 X 1024 @60Hz

 

  EPA ENERGY STAR

® 

 Dual Input (DVI + Analog) 

(Only Dual-Input Model) 

 Ergonomic Design (TCO’

03

 Approved) 

  Space Saving, Compact Case Design 

 

CHECKING THE CONTENTS OF THE PACKAGE

 

 

   
The product package should include the following items: 

 
1. LCD 

Monitor 

2. Owner's 

Manual 

3.  Power Cord  
4. External 

Adapter 

5.  15-pin D-Sub Cable 
6. DVI Cable

(Only Dual-Input Model) 

7. Audio 

Cable 

 
 

8.    Pivot Software

 

(Only AL1722 r)

Содержание AL1722





















Отзывы: