Acer AL1713bm, Руководство по обслуживанию

Страница: 23 / 47

22
MACHINE ASSEMBLY
This chapter contains step-by-step procedures on how to assemble the monitor for maintenance and
troubleshooting.
NOTE:
1. The screws for the different components vary in size. During the disassembly process, collect the screws with the
corresponding components to avoid mismatch when putting back the components.
2. The monitor surface is susceptible to scratching! Therefore, lay the monitor on a soft surface when mounting or removing
the base.
3. Wear gloves
Chassis*1
Front bezel*1
Button*1
Indicator*1
Control board*1
(PW3x6,M,ZN-CC)*
Back cover*1
(B3x8,T6,black)*2
Hinge cover*1
Speaker L*1
Speaker R*1
(B3x8,T6,black)*
Base
Stand plate*1
(F3x8,T6,ZN)*6
Interface board*1
(PW3x6,M
Δ,
S-TITE,ZN)*3
CPT Panel*1
(PW3x6, M, ZN-CC)*8
Cord keep*2
FFC (30pin)*1
TAPE, 3M#5491(19x60mm)*1
POW/INV board*1
(PW3x6,M
Δ,
S-TITE,ZN)*3
EMI shield*1
(PW3x6, M ∆ , S-TITE,ZN)*5
Mounting bracket
(F4x6, M, ZN)*4
Out port
(PW3x6,M
Δ,
S-TITE,ZN)*3
(F3x8, M
Δ,
S-TITE, NI)*2
Cable ties*1
Rubber*4
Arm Stand*1
(P/2FW4x22,M,ZN)*
Hinge L*1
Hinge R*1
(F4x6,M,ZN)*4
Gasket (20x10x3mm)*4
Chapter 3