background image

23

Chapter 2

The advanced chipset features setup option is used to change the values of the chipset registers. These 
registers control most of the system options in the computer.

NOTE: 

Change these settings only if you are familiar with the chipset.

Boot Up Floppy Seek

Setting to Enabled will make BIOS seek floppy 
drive a: before booting the system.

Enabled

 

Disabled

Boot Up NumLock Status

Sets the NumLock status when the system is 
powered on. Setting to On will turn on the 
NumLock key when the system is powered on. 
Setting to Off will allows users to use the arrow 
keys on the numeric keypad. 

On

Off

Typematic Rate Setting

This item is used to enable or disable the 
typematic rate setting including Typematic Rate 
and Typematic Delay.

Enabled

 

Disabled

Typematic Rate (Chars/Sec) Use this item to define how many characters per second are generated by a held-down 

key.

Typematic Delay (Msec)

Use this item to define how many milliseconds
must elapse before a held-down key begins generating repeat characters.

Security Option

Specifies the type of BIOS password protection  
that is implemented. Setup means that the 
password prompt appears only when end users 
try to run Setup. System means that a password 
prompt appears every time when the computer 
is powered on or when end users try to run 
Setup.

Setup

System

APIC Mode

This field is used to enable or disable the APIC 
(Advanced Programmable Interrupt Controller). 
Due to compliance with PC2001 design guide, 
the system is able to run in APIC mode. 
Enabling APIC mode will expand available IRQ 
resources from the system.

Enabled

Disabled

MPS Version Control For OS This item displays MPS version control for OS.

1.4

OS Select For DRAM > 
64MB

This item is only required if you have installed 
more than 64MB of memory and you are 
running the OS/2 operating system.

Non-OS2

OS2

HDD S.M.A.R.T Capability

The S.M.A.R.T (Self-Monitoring, Analysis, and 
Reporting Technology) system is a diagnostics 
technology that monitors and predicts device 
performance.

Enabled

Disabled

Video BIOS Shadow

This item determines whether the BIOS will be 
copied to RAM for faster execution.

Enabled

Disabled

Parameter

Description

Options

 

Содержание AcerPower S290









































































Отзывы: