![background image](http://html.mh-extra.com/html/acer/acerpower-fh-sk50/acerpower-fh-sk50_service-manual_5756034.webp)
Chapter 2
28
T
Delay Prior to Thermal (16 Min)
: This item enables you to set the delay time before the CPU
enters auto thermal mode.
T
Thermal Management (Thermal Monitor 1)
: This item displays CPU’s temperature and
enables you to set a safe temperature to Prescott CPU.
T
TM2 Bus Ratio (12X)
: This item represents the frequency (bus ratio) of the throttled
performance state that will be initiated when the on-die sensor goes from not hot to hot.
T
TMS Bus VID (1.2000V)
: This item represents the voltage of the throttled performance state
that will be initiated when the on-die sensor goes from not hot to hot.
T
Limit CPUID MaxVal (Disabled)
: This item can support Prescott CPUs for old OS. Please
note that under NT4.0, it must be set
Enabled
while under WinXP, it must be set
Disabled
.
T
Execute Disable Bit (Enabled)
: This item is a security feature that helps you protect your
CPU and operating system against malicious software executing code. This item is available
when CPU supports the feature.
T
Hard Disk Boot Priority (Press Enter)
: Scroll to this item and press <Enter> to view the following
screen.
T
Virus Warning (Disabled)
: This item is used to enable or disable virus warning function.
T
CPU L1 & L2 Cache (Enabled)
: All processors that can be installed in this main board use
internal level 1 (L1) and external level 2 (L2) cache memory to improve performance. Leave this
item at the default value for better performance.
T
Hyper-Threading Technology (Enabled)
: This item is only available when the chipset supports
Hyper-Threading and you are using a Hyper-Threading CPU.
T
Quick Power On Self Test (Enabled)
: Enable this item to shorten the power on testing (POST)
and have your system start up faster. You might like to enable this item after you are confident that
your system hardware is operating smoothly.
T
First/Second/Third Boot Device (Floppy/Hard Disk/CD ROM)
: Use these three items to select
the priority and order of the devices that your system searches for an operating system at start-up
time.
T
Boot Other Device (Enabled)
: When enabled, the system searches all other possible locations
for an operating system if it fails to find one in the devices specified under the First, Second and
1. Ch2 M.
: ST3160812AS
2. Bootable Add-in Cards
Phoenix-AwardBIOS CMOS Setup Utility
Hard Disk Boot Priority
Item Help
ff
Menu Level
Use <
> or < > to
select a device, then
press <+> to move it
up, or <-> to move it
down the list. Press
<ESC> to exit this
menu.
m
n
mnlk
F5:Previous Values F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
Содержание AcerPower FH/SK50
