manualshive.com logo in svg

Acer AcerPower F2, Руководство по обслуживанию

Поделиться
Скачать
Acer AcerPower F2 Скачать руководство пользователя страница 32

24

Chapter 2

Boot Other Device

This parameter allows you to specify the system 
boot up search sequence. 

Enabled

Disabled

Swap Floppy Drive

Setting to Enabled will swap floppy drive a: and 
b:.

Enabled

 

Disabled

Boot Up Floppy Seek

Setting to Enabled will make BIOS seek floppy 
drive a: before booting the system.

Enabled

 

Disabled

Boot Up NumLock Status

Sets the NumLock status when the system is 
powered on. Setting to On will turn on the 
NumLock key when the system is powered on. 
Setting to Off will allows users to use the arrow 
keys on the numeric keypad. 

On

Off

Gate A20 Option

This item is to set the Gate A20 status. A20 
refers to the first 64KB of extended memory. 
When the default value Fast is selected, the 
Gate A20 is controlled by port 92 or chipset 
specific method resulting in faster system 
performance. When Normal is selected, A20 is 
controlled by a keyboard controller or chipset 
hardware.

Fast

Normal

Typematic Rate Setting

This item is used to enable or disable the 
typematic rate setting including Typematic Rate 
and Typematic Delay.

Enabled

 

Disabled

Typematic Rate

After Typematic Rate Setting is enabled, this 
item allows you to set the rate (characters/
second) at which at keys are accelerated.

Settings: 6,8,10,12,15,20,24 and 30

Typematic Delay

 This item allows you to select the delay 
between when the key was first pressed and 
when the acceleration begins

Settings: 250, 500, 750 and 1000

Security Option

Specifies the type of BIOS password protection 
that is implemented. Setup means that the 
password prompt appears only when end users 
try to run Setup. System means that a password 
prompt appears every time when the computer 
is powered on or when end users try to run 
Setup.

Setup

System

APIC Mode

This field is used to enable or disable the APIC 
(Advanced Programmable Interrupt Controller). 
Due to compliance with PC2001 design guide, 
the system is able to run in APIC mode. 
Enabling APIC mode will expand available IRQ 
resources from the system.

Enabled

Disabled

MPS Version Control For OS This option is used to set up the version of MPS 

Table used in NT4.0 OS.

1.4

OS Select For DRAM > 
64MB

This item is only required if you have installed 
more than 64MB of memory and you are 
running the OS/2 operating system.

Non-OS2

OS2

HDD S.M.A.R.T Capability

The S.M.A.R.T (Self-Monitoring, Analysis, and 
Reporting Technology) system is a diagnostics 
technology that monitors and predicts device 
performance.

Enabled

Disabled

Report No FDD For WIN 95

If you are using the Windows 95 and running a 
system with on floppy drive,select “Yes” for this 
item to ensure compatibility with Windows 95 
logo certification. The available setting values 
are: No and Yes

No

Yes

Small Logo (EPA) Show

This item allows you to enable or disable the 
EPA logo. The available setting values are : 
Disabled and Enabled.

Enabled

Disabled

Parameter

Description

Options

 

Содержание AcerPower F2









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды