![background image](http://html.mh-extra.com/html/acer/acerpower-8400/acerpower-8400_user-manual_5735085.webp)
75
Opening the System
Caution: Before you proceed, make sure that you have turned off the
system and all peripherals connected to it. Read the “Preinstallation
Instructions” on page 73.
This section tells you how to open the housing cover when
you need to install additional components inside the system
unit.
Removing the Housing Cover
1.
Turn off the system power and unplug all cables.
2.
Place the system unit on a flat, steady surface.
3.
Remove the screws (two) on one side of the cover using
a screwdriver. Set the screws aside.
4.
Hold the side of the cover with both hands. Slide it back
about an inch and then gently pull it outward to detach
it.
5.
Follow steps 3 and 4 to remove the other side.
Ap8400-e.book Page 75 Friday, October 1, 1999 2:20 PM
Содержание AcerPower 8400
