![background image](http://html.mh-extra.com/html/acer/acerpower-4100/acerpower-4100_user-manual_5715080.webp)
Chapter 3 - BIOS Utility 3-29
Setting a Password
1.
Make sure that switch 2 of S1 is set to
On
(bypass password).
You cannot enter the BIOS utility if a Setup
password does not exist and switch 2 of S1 is set
to
Off
(password check enabled).
By default, switch 2 of S1 is set to
On
(bypass
password).
2.
Enter the BIOS utility and select System Security.
3.
Highlight the Setup Password parameter and press
or
. The following screen
appears:
Setup Password
Enter your new Password twice. Password
may be up to 7 characters long.
Enter Password .................. [XXXXXXX]
Enter Password again ............ [XXXXXXX]
Set or Change Password
4.
Type a password. The password may consist of up to seven characters. Then press
.