AcerPower 2000 User’s Guide
4-18
Follow these steps to install a Pentium II CPU:
1.
Remove the processor card from its protective packaging. Make sure that the
latches on the sides of the module are not pressed.
2.
Insert the clip ends into the holes on the processor as shown below.
Figure 4-17 Inserting the Clip Ends into the Processor Holes
3.
Lower the processor into to the CPU socket and gently push it in until the
golden fingers completely fit into the connector and the latches on the sides
lock the processor into place.
Figure 4-18 Installing the Pentium II CPU
