background image

 

 

 

 

1

Table of Contents 

Important Safety Instructions....................................................................................................... 1

 

Federal Communications Commission........................................................................................ 4 
Connecting the Monitor and Swivel Base.................................................................................... 2

 

Removing the Monitor and Swivel Base ...................................................................................... 2

 

Introduction.................................................................................................................................... 3

 

Installation...................................................................................................................................... 3

 

User Controls.................................................................................................................................. 4

 

OSD Function Description............................................................................................................ 4

 

OSD Icon Summary....................................................................................................................... 5

 

Specification.................................................................................................................................... 5

 

Troubleshooting............................................................................................................................. 7

 

 

Important Safety Instructions   

1. 

Please read these instructions thoroughly. 

2. 

Please keep this guide for future use. 

3. 

Please disconnect the device from the main power  supply before cleaning. Do not use any liquids or aerosol 
sprays to clean this device. Use a clean dampened cloth in stead. 

4. 

To avoid damaging t he device, only use factory-approved  accessories. 

5. 

Protect the device against moisture. 

6. 

In order to set   up the device, first place it  on a stable surface. Tipping it over or dropping  can harm the 
monitor and  cause injuries. Please follow the setup instructions of the manufacturer while setting up your 
monitor. 

7. 

The ventilation openings are used for air circulation to protect the device against overheating.  

8. 

When connect ing the device, obey the maximum  connected load values of the main power supply. 

9. 

T he wall socket must be equipped with a non-fused grounded conductor contact  for electrical safety. 

10. 

The power cable must be laid in  such  a way nobody can trip over it. Please do not place any objects on the 
cable. 

11. 

Follow all instructions and warning remarks  that are printed  on the device. 

12. 

If the device will not be used for a long period of time, please disconnect it from the main power  supply to 
avoid  power surge damage such as lightning. 

13. 

Make sure no sharp objects or liquids enter the device via its air circulation openings. This could result in  a 
fire or an electric shock. 

14. 

Never open the device  casing yourself, there are no user serviceable parts inside.  Only authorized technical 
service personnel should open the casing of this device. 

15. 

If  any of the  following conditions occur, the device must be disconnected from the main supply, and be 
checked by a qualified service center: 
a-  Power cable or power plug are damaged; 
b-  Liquid has entered the device; 
c-  The device was exposed to moisture; 
d-  The device does not operate according t o the user’s guide, or you do not achieve any improvement with 

the aid of this guide; 

e-  The device has  been dropped and/or the casing is damaged; 
f-  The device shows obvious signs of a defect. 

16. 

Use only approved original spare parts, or parts in accordance with the

 

original parts, for repairs. The use of 

incorrect/unauthorized spare parts may cause further damage. 

17. 

Please contact your service center for any questions regarding service and repairs to guarantee the device’s 
performance and  reliability. 

18. 

The power socket must be installed near the equipment to be easily accessible. 

All manuals and user guides at all-guides.com

all-guides.com

Содержание AC 711








Отзывы: