18
Note
¡ G
If there is any other DHCP server in the Network, please select “
Specify an IP
address
” and use the default value “
192.168.1.***
”
¡ ]
*** is between 2 and 252
¡ ^
, set
Subnet Mask “
255.255.255.0
” , Gateway IP “
192.168.1.1
” and DNS for configuration.
After finishing TCP/IP set up, reboot the computer and run the browser to configure the
AcerRouter 101/201. Afterwards, set up other PC in the LAN according to above
procedures.
3.3 AcerRouter 101/201 settings
1. Start your web browser (Netscape Navigator 4.0 or Microsoft Explorer4.0 later or
other Java compatible browser) and type
192.168.1.1
in the address and press
“
ENTER
” key on your keyboard. The “ Username and Password Required”
window will pop up. Leave the User Name blank and fill in the Password “
admin
” .
Then click “
OK
” to enter Web Management.
The Quick Setup window pops up consequently.
