8
Method C: Software control
through RS-232 port
(1) Please download the software from SIIG website.
(CE-H23H11-S1 "Downloads" page ).
(2) OS Information: MS WinXP/7/8.1/10
(3) Baud rates: 9600
(4) Software size: 1 MB
(5) Minimum RAM requirement: 256 MB
1
2
6
4
5
7
8
3
1
Power ON/ Standby mode
2
Control SW via RS-232
3
COM Port Selection
4
I/O Routing Button
5
EDID Button
6
Rename I/O Button
7
Network Setting & Default Reset Button
8
Firmware Update Button
1. Mapping page
• I/O Mapping:
Switch the input for each output
• Recall Mapping:
(1) Select the stored Mapping(1-8)
(2) Click “Recall” button to recall previous mapping which are saved
• Save Mapping:
(1) Select Mapping(1-8)
(2) Click “Save” button to save current mapping
